Configuring Timing References
Use the following CLI syntax to configure timing reference parameters. Note that the source port
specified for ref1 and ref2 cannot both be from the same slot.The following displays a timing
reference configuration example:
ALA-12>config>system>sync-if-timing# info
----------------------------------------------
----------------------------------------------
ALA-12>config>system>sync-if-timing#
7950 SR OS Basic System Configuration Guide
ref-order ref2 ref1 bits
ref1
source-port 3/1/1
no shutdown
exit
ref2
source-port 6/1/2
no shutdown
exit
bits
interface-type ds1 esf
no shutdown
exit
System Management
Page 309