Date And Time Commands - Alcatel-Lucent 7950 XRS Series Configuration Manual

System Command Reference

Date and Time Commands

set-time
Syntax set-time [date] [time]
Context admin
Description This command sets the local system time.
The time entered should be accurate for the time zone configured for the system. The system will convert the
local time to UTC before saving to the system clock which is always set to UTC. This command does not
take into account any daylight saving offset if defined.
Parameters
date — The local date and time accurate to the minute in the YYYY/MM/DD format.
Values
time — The time (accurate to the second) in the hh:mm[:ss] format. If no seconds value is entered, the
seconds are reset to :00.
Default
Values
time
Syntax time
Context config>system
Description
This command enables the context to configure the system time zone and time synchronization parameters.
Page 354
YYYY is the four-digit year
MM is the two-digit month
DD is the two-digit date
0
hh is the two-digit hour in 24 hour format (00=midnight, 12=noon)
mm is the two-digit minute
7950 SR OS Basic System Configuration Guide