Table of Contents
Advertisement
Display-config
Tech-support
The tech-support command creates a system core dump. NOTE: This command should only be
used with explicit authorization and direction from Alcatel-Lucent's Technical Assistance Center
(TAC).
The config>system>security>tech-support>ts-location file-url command configures a tech-
support default file location.
Save
The
save
parameter is specified, debug configurations are saved in the config file. If this parameter is
save
not specified, debug configurations are not saved between reboots.
CLI Syntax: admin
Example
The following example displays the
A:ALA-1>admin# save ftp://test:test@192.168.x.xx/./1x.cfg
Writing file to ftp://test:test@192.168.x.xx/./1x.cfg
Saving configuration ...Completed.
ALA-1>admin# debug-save ftp://test:test@192.168.x.xx/./debugsave.txt
Writing file to ftp://julie:julie@192.168.x.xx/./debugsave.txt
Saving debug configuration .....Completed.
A:ALA-1>admin#
Page 302
command saves the running configuration to a configuration file. When the
save [file-url] [detail] [index]
debug-save [file-url]
:
admin# save ftp://test:test@192.168.x.xx/./1.cfg
admin# debug-save debugsave.txt
command results.
save
7950 SR OS Basic System Configuration Guide
debug-
Advertisement
Table of Contents
