Table of Contents
Advertisement
Configuring Synchronization and Redundancy
Configuring Manual Synchronization
Note that automatic synchronization can be configured in the config>system> synchronization
context.
CLI Syntax: admin
Example
The following shows the output which displays during a manual synchronization:
A:ALA-12>admin# synchronize config
Syncing configuration......
Syncing configuration.....Completed.
A:ALA-12#
Forcing a Switchover
The force-switchover now command forces an immediate switchover to the standby CPMcard.
CLI Syntax: admin>redundancy
Example
A:ALA-12# admin redundancy force-switchover now
A:ALA-12#
Resetting...
?
If the active and standby are not synchronized for some reason, users can manually synchronize
the standby CPM by rebooting the standby by issuing the admin reboot standby command on
the active or the standby CPM.
Page 294
redundancy
synchronize {boot-env|config}
:
admin>redundancy# synchronize config
force-switchover [now]
:
admin>redundancy# force-switchover now
7950 SR OS Basic System Configuration Guide
Advertisement
Table of Contents
