Installing The Twain Driver From The Supplied Cd-Rom - Ricoh en5100wd Operating Instructions Manual

5. Scanning Originals with the Network TWAIN Scanner
For details about installing the TWAIN driver, see "Installing the TWAIN Driver from the Supplied CD-
ROM".
• p.120 "Installing the TWAIN Driver from the Supplied CD-ROM"
Install a TWAIN-compliant application on the same client computer
To use this machine as a network TWAIN scanner, a TWAIN-compliant application, such as
DeskTopBinder, must be installed on the client computer. DeskTopBinder Lite is included on the supplied
CD-ROM.
For details about installing DeskTopBinder Lite, see "Installing DeskTopBinder Lite from the Supplied CD-
ROM".
• p.101 "Installing DeskTopBinder Lite from the Supplied CD-ROM"

Installing the TWAIN Driver from the Supplied CD-ROM

This section explains how to install the TWAIN driver on a client computer from the supplied CD-ROM.
To use the network TWAIN scanner, you must install the TWAIN driver on a client computer.
1. Start Windows, and then insert the CD-ROM into the CD-ROM drive of the client
computer.
The installer starts.
2. Click [TWAIN Driver].
3. The installer of the TWAIN driver starts. Follow the instructions.
• Before you start the installation, check the system requirements for the TWAIN driver. For
details about the system requirements, see "Software Supplied on CD-ROM".
• You can install the software using the auto-run program. For details about the auto-run
program, see "Auto-Run Program".
• If the installer does not start automatically, see "Auto-Run Program".
• When the installation is complete, a message about restarting the client computer may
appear. In this case, restart the client computer.
• After the installation is complete, a folder with the name of the machine in use is added in
[Programs] or [All Programs] on the [Start] menu. Help can be displayed from here.
• Notes on using the network TWAIN scanner are provided in "Readme.txt". Be sure to read
them before use.
120