Registering The Default Values Of The Scanner's Initial Display - Ricoh en5100wd Operating Instructions Manual

Registering the Default Values of the Scanner's
Initial Display
This section explains how to set defaults for the initial screen, which appears when the machine is turned
on or when settings are cleared or reset.
The following settings can be registered as defaults: Scan Settings, Original Orientation, File Type, Store
File, Preview, Reception Notice, Security (E-mail Encryption and Signature), and Original Output Exit.
1. Make the necessary scan settings on the initial screen.
2. Press the [Program] key.
3. Press [Program as Defaults].
4. Press [Program].
A confirmation screen appears.
5. Press [Yes].
The current settings are registered as defaults, and then the initial screen reappears.
• To restore the initial screen's original default settings, press [Restore Factory Defaults].
• Default settings for the initial screen can be registered for normal screens and simplified
displays respectively.

Registering the Default Values of the Scanner's Initial Display

BLT014S
157