Ricoh en5100wd Operating Instructions Manual page 154

6. Various Scan Settings
6. In [Password], press [Enter].
7. Enter a password, and then press [OK].
The password entered here will be required to change the security settings of the PDF file.
8. Enter the password again, and then press [OK].
9. Select the security permission setting.
You can specify the following security settings:
• Print permission: [Prohibit], [Allow], or [Low Resolution Only]
• Editing permission: [Prohibit] or [Allow]
• Copying or extracting content permission: [Prohibit] or [Allow]
10. Press [OK] twice.
• The [Password] and [Master Password] cannot be the same.
• You can enter up to 32 alphanumeric characters for a Master Password.
• If [40 bit] is selected as the PDF encryption level, you cannot select [Low Resolution Only] as
the print permission.
152