Display Interface - HP 6600 Command Reference Manual

exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
The statistics cover only interfaces in up state. If an interface type is specified, the command displays
traffic rate statistics for all up interfaces of the specified type. If no interface type is specified, the
command displays traffic rate statistics for all up interfaces that have traffic counters.
For the sampling interval:
• For 6602, the sampling interval is 5 minutes.
For 6604/6608/6616, use the flow-interval command to set the sampling interval. The system
•
default is 300 seconds.
Examples
# Display the inbound traffic rate statistics for all GigabitEthernet interfaces.
<Sysname> display counters rate inbound interface gigabitethernet
Interface
GE1/1
GE1/2
GE1/3
Overflow: more than 14 decimal digits.
--: not supported.
Table 2 Command output
Field
Interface
Total (pkts/sec)
Broadcast (pkts/sec)
Multicast (pkts/sec)
Overflow: more than 14
decimal digits.
--: not supported.
Related commands
flow-interval

display interface

Use display interface to display Ethernet interface information.
Total(pkts/sec) Broadcast(pkts/sec)
200
300
300
Description
Abbreviated interface name.
Average rate (in pps) of receiving or sending packets during the sampling
interval.
Average rate (in pps) of receiving or sending broadcast packets during the
sampling interval. On an RPR physical port, all broadcast and multicast
packets received or sent are displayed as multicast packets.
Average rate (in pps) of receiving or sending multicast packets during the
sampling interval. On an RPR physical port, all broadcast and multicast
packets received or sent are displayed as multicast packets.
The command displays Overflow if any of the following applies:
•
The data length of an error statistic is greater than 7 decimal digits.
•
The data length of a non-error statistic is greater than 14 decimal digits.
The statistical item is not supported.
6
Multicast(pkts/sec)
100
200
200
100
100
100