Reverse-Rts; Sub-Interface Rate-Statistic - HP 6600 Command Reference Manual

reverse-rts

Use reverse-rts to reverse RTS signal in synchronous mode for debugging purpose.
Use undo reverse-rts to restore the default.
Syntax
reverse-rts
undo reverse-rts
Default
RTS signal reverse is disabled.
Views
Synchronous serial interface view
Default command level
2: System level
Usage guidelines
This command is used in hardware flow control where the remote is not allowed to send data when the
local end is doing that.
Examples
# Reverse the RTS signal.
<Sysname> system-view
[Sysname] interface serial 1/0/0
[Sysname-Serial1/0/0] reverse-rts

sub-interface rate-statistic

Use sub-interface rate-statistic to enable subinterface rate statistics collection on a serial interface.
Use undo sub-interface rate-statistic to disable subinterface rate statistics collection on a serial interface.
Syntax
sub-interface rate-statistic
undo sub-interface rate-statistic
Default
The system does not collect subinterface rate statistics for a serial interface.
Views
Serial interface view
Default command level
2: System level
Usage guidelines
Use this function with caution, because it is system resource demanding.
Serial interfaces that support this function include synchronous serial interfaces and sub-channel serial
interfaces.
85