6.2
MG 56-3 stand
4
3
6.2.1
Aligning the pedal
18
2
–
Screw the set-value initiator 3 onto the plate 5 on stand 1 using
two screws 4 (M6 x 80).
–
Hang the rod 2 on the set-value initiator 3 and pedal.
–
Loosen screw on the rod 2.
–
Adjust the height of the pedal rod so that the released (at rest)
pedal has a decline of about 10°.
–
Tighten the screw on the rod 2.
5
1