Oil Lubrication - Dürkopp Adler 869 Operating Instructions Manual

10.2 Oil Lubrication

Maintenance work
to be carried out
Lubrication of the machine
head
36
1
Caution: Risk of injury!
Oil can cause skin eruptions.
Avoid protracted contact with the skin.
In the event of contact, thoroughly wash the affected area.
ATTENTION!
The handling and disposal of mineral oils is subject to legal regulation.
Deliver used oil to an authorised collection point.
Protect your environment.
Take care not to spill oil.
To lubricate the special sewing machine use only DA 10 lubricating oil
or an equivalent oil of the following specification:
–
Viscosity at 40° C:
–
Flashpoint:
DA 10 is available from DÜRKOPP ADLER AG retail outlets under the
following part numbers:
250-ml container: 9047 000011
1-litre container: 9047 000012
2-litre container: 9047 000013
5-litre container: 9047 000014
Explanation
The head is equipped with centralized oil
wick lubrication. The bearings are supplied
by the oil reservoir 1.
- The oil level must not drop
below the mark 3 on the oil reservoir.
The oil reservoir illuminates when the oil
level falls below the mark 3. (Only for
subclass 869-180322, 869-280322)
- Refill oil through the hole 2 until it reaches
the "MAX" mark.
2
10 mm /s
150° C
Operating
hours
8