Key Pad On The Machine Arm - Dürkopp Adler 869 Operating Instructions Manual

6.16 Key pad on the machine arm

8
7
6
Key Function
1 Supplementary tread tension
Button is back-lit: the supplementary thread tension
is activated.
Button is not back-lit: the supplementary thread
tension is not activated.
2 2nd stitch length
Button is back-lit: long stitch length (upper setting
wheel) is activated
Button is not back-lit: small stitch length (lower
setting wheel) is activated
3 Recalling or suppressing the initial or final bartack.
If the initial and final bartacks are activated, then the
next bartack is deactivated when the button is
pressed.
If the initial and final bartacks are not activated, then
the next bartack is activated when the button is
pressed.
4 Move the needle to the upper or lower position.
The function of the button can be set with the
parameter F-242.
1 = needle up/down
2 = needle up
3 = single stitch
4 = full stitch
5 = needle to position 2
The factory setting is 1 (needle up/down).
5 Manually sewing backward.
The machine sews backwards for as long as the
button is held down.
5 4 3 2 1
GB
27