Mg 56-3 Stand Assembly - Dürkopp Adler 869 Operating Instructions Manual

3.2

MG 56-3 stand assembly

4
4
3
–
Assemble the stand according to the illustration.
–
Fasten the pedal 2 to the stand brace 1.
–
Mount the stand brace 1 to the stand.
–
Turn the adjusting screws 4 to ensure a secure mount on the
stand.
The stand must be resting with all six feet on the floor.
–
Align the pedal after you have assembled the complete machine.
–
Screw on the holder for the oil can 5.
–
Assemble the rod 6 (only for FIR clutch motor).
1
2
5
6
GB
7