Using The Smart Remote With An Optifiber Certifying Otdr; Certification, Compliance, And Regulatory Information; Csa Standards - Fluke DTX-CLT CertiFiber User Manual

Using the Smart Remote with an
OptiFiber Certifying OTDR
™
You can use a DTX Series smart remote with a
DTX-MFM2 or DTX-SFM2 fiber module as the remote for a
Fluke Networks OptiFiber Certifying OTDR. The DTX
remote takes the place of a second OptiFiber tester for
measuring loss and length with the OptiFiber loss/length
option in Smart Remote mode. You can buy a smart
remote separately for this purpose. See the Fluke
Networks website or contact Fluke Networks for details.
Using the Smart Remote with an OptiFiber
Certification, Compliance, and
Regulatory Information
;
Conforms to relevant Australian
standards
P
Conforms to relevant European Union
directives.
)
Listed by the Canadian Standards
Association.
Laser safety
OUTPUT port: Class 1
VFL port: Class 2
Complies with EN60825-1 and
EN61010-1 (CE) and CFR21

CSA Standards

CAN/CSA-C22.2 No. 1010.1-92 + Amendment 2: 1997 and
CAN/CSA-C22.2 No. 1010.1 2000 (2nd edition) Safety
Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use, Part 1: General Requirements.
™
Certifying OTDR
65