Xcondition; Xotime - HP 16554A Programmer's Manual

TWAVeform Subsystem

XCONdition

XCONdition
Command :MACHine{1|2}:TWAVeform:XCONdition
{ENTering | EXITing}
The XCONdition command specifies where the X marker is placed. The X
marker can be placed on the entry or exit point of the XPATtern when in the
PATTern marker mode.
Example
OUTPUT XXX; ":MACHINE1:TWAVEFORM:XCONDITION ENTERING"
Query :MACHine{1|2}:TWAVeform:XCONdition?
The XCONdition query returns the current setting.
Returned Format
[:MACHine{1|2}:TWAVeform:XCONdition] {ENTering|EXITing}<NL>
Example
OUTPUT XXX;":MACHINE1:TWAVEFORM:XCONDITION?"

XOTime

Query :MACHine{1|2}:TWAVeform:XOTime?
The XOTime query returns the time from the X marker to the O marker. If
data is not valid, the query returns 9.9E37.
Returned Format
[:MACHine{1|2}:TWAVeform:XOTime] <time_value><NL>
real number
<time_value>
Example
OUTPUT XXX;":MACHINE1:TWAVEFORM:XOTIME?"
13–26