Fujitsu SPARC Enterprise M3000 Product Notes page 41

XCP Issues Fixed in Releases Earlier Than XCP 1112 (Continued)
TABLE 3-3
M4000
ID M3000 M5000
RTIF1- O
070914-017
RTIF1- O
070914-018
RTIF1- O
070914-019
RTIF1- O
070914-020
RTIF1- O
070914-021
RTIF1- O
070914-023
RTIF1- O
070914-024
M8000
M9000 Description
O On the XSCF Web, when you select
[LDAP] and input the [LDAP Search
Timeout] with a value which exceeds
the maximum 2147483647 seconds, it
doesn't result in parameter error.
O On the XSCF Web, when you use a user
account without an appropriate
privilege to select [LDAP] and execute
the [Delete] button, it results in a
privilege error but the configuration
information which has been displayed
will be cleared and seems as if deleted.
O The CLI 'showldap -c' (which
displays current LDAP certificates) will
show proper data only when used with
the same user account that had
originally provided certificate
information using 'setldap -c'. Any
other user account will generate
"Permission denied" error. Similarly,
the XSCF Web's [LDAP Configuration]
pop-up screen will display no data,
when a different user account is used.
O On the User Account setting page on
the [User Manager] screen, after the
password change resulted in "Change
Password Error," when you click on
the [REFRESH] button, there appears
the error message "No user. The
request is aborted."
O During the OpenBoot PROM process,
when you power off the domain, the
error log of Domain hang-up
detected (level3) may be
registered.
O When you specify the domain ID or
XSB number which are not supported
on the server, there appears the
parameter error message.
O When you display the physical tree on
the XSCF Web, the warning mark is
displayed on the link card for External
I/O expansion unit.
Workaround
None available at this time. The
maximum 2147483647 seconds will be
set to the [LDAP Search Timeout].
The configuration is not deleted. To
show the configuration information
again, select [LDAP] from the Menu.
Use the same user account for all LDAP
display or configuration operations, for
both CLI and XSCF Web.
To change the password, select [User
Manager] on the Menu again.
This error log can be safely ignored.
Specify the available domain ID or XSB
number on the server.
None available at this time.
Chapter 3 Information About Software 27