Oracle Solaris Os Issues Fixed In Oracle Solaris 10 5/08 - Fujitsu SPARC Enterprise M3000 Product Notes

Oracle Solaris OS Issues Fixed in Oracle Solaris 10
5/08
TABLE 3-10
encounter them in supported releases earlier than Oracle Solaris 10 5/08.

Oracle Solaris OS Issues Fixed in Oracle Solaris 10 5/08

TABLE 3-10
M4000
CR ID M3000 M5000
5076574
6402328
6472153 O
58 SPARC Enterprise Mx000 Servers Product Notes for XCP Version 1112 • May 2012
lists issues that have been fixed in Oracle Solaris 10 5/08 OS. You might
M8000
M9000 Description
O A PCIe error can lead to an invalid fault
diagnosis on a large M8000/M9000
domain.
O System panic might happen due to be
over the interrupt number limit when
one domain has seven or more IOUA
cards.
O If you create an Oracle Solaris OS Flash
archive on a non-
M4000/M5000/M8000/M9000 sun4u
server and install it on a
M4000/M5000/M8000/M9000 sun4u
server, the console's TTY flags will not
be set correctly. This can cause the
console to lose characters during stress.
Workaround
For Oracle Solaris 10 8/07 or earlier,
this has been fixed in patch 127127-11.
[Workaround]
Create a file /etc/fm/fmd/fmd.conf
containing the following lines;
setprop client. buflim 40m
setprop client. memlim 40m
For Oracle Solaris 10 8/07 or earlier,
this has been fixed in patch 127127-11.
[Workaround]
Use six or less IOUA cards on one
domain.
For Oracle Solaris 10 8/07 or earlier,
this has been fixed in patch 137046-01.
[Workaround]
Just after installing Oracle Solaris OS
from an Oracle Solaris Flash archive,
telnet into the
M4000/M5000/M8000/M9000 server to
reset the console's TTY flags a follows:
# sttydefs -r console
# sttydefs -a console -i "9600
hupcl opost onlcr crtscts" -f
"9600"
This procedure is required only once.