Commissioning, Inspection, Maintenance; Steps - Commissioning, Inspection And Maintenance - Viessmann VITODENS 200-W Installation And Service Instructions Manual

Steps - commissioning, inspection and maintenance

For further information regarding the individual steps, see the page indicated
Commissioning steps
Inspection steps
Maintenance steps
•
1. Checking the power supply
•
2. Filling the heating system.............................................. 29
•
3. Switching on the mains voltage and ON/OFF switch
•
4. Language selection - only for weather-compensated
• •
5. Setting the time and date - only for weather-
•
6. Note on the automatic flue gas temperature sensor
•
7. Venting the boiler........................................................... 31
•
8. Venting the heating system........................................... 32
•
9. Filling the siphon with water......................................... 33
• • •
10. Checking all connections on the heating water side
•
11. Designating heating circuits - only for weather-
• •
12. Checking the gas type.................................................... 34
•
13. Gas type conversion (only for operation with LPG).... 35
• • •
14. Checking the static and supply pressure..................... 35
•
15. Function sequence and possible faults....................... 37
•
16. Max. heating output setting........................................... 39
•
17. Tightness test for balanced flue system (annular gap
• •
18. Burner removal .............................................................. 40
• •
19. Checking the burner gasket and burner gauze

Commissioning, inspection, maintenance

control units.................................................................... 30
compensated control units and for timer controlled
constant temperature units........................................... 30
test................................................................................... 31
and DHW side for leaks
compensated control units............................................ 34
check).............................................................................. 39
assembly......................................................................... 41
Page
27