Maintenance and Care
12
Lubricating the roller presser drive gear mechanism
.07
12
Cleaning the blower air fi lter
.08
76
1
Fig. 12 - 06
Fig. 12 - 07
Loosen the screws 1.
Remove the cover 2.
2
Lubricate the gear mechanism.
Fit the cover 2 again.
Tighten the screws 1.
Remove the cover 1.
Remove the fi lter element and blow it
out with compressed air.
Insert the cleaned fi lter element and fi t
the cover 1.
1
(only for a diameter of 25 mm and 35 mm)
Switch off the machine!
Risk of injury due to accidental
machine start-up!
Only use grease with a dripping
point of approx. 150 °C!
We recommend PFAFF sodi-
um soap grease with a dripping
point of approx. 150 °C.
Order no. 280-1-120 243.