Topping Up The Thread Lubrication Oil Reservoir; Lubricating The Roller Presser Drive Gear Mechanism (Only At Ø 25 Mm And Ø 35 Mm) - Pfaff 1571 Instruction Manual

12

Topping up the thread lubrication oil reservoir

.06
1
Fig. 12 - 05
12 Lubricating the roller presser drive gear mechanism
.07
Fig. 12 - 06
2
1
Maintenance and Care
Check the oil level before every
start-up.
The oil reservoir 1 must always
have oil in it.
 Add oil through the hole as needed.
We recommend PFAFF thread
lubricating oil,
order no. 280-1-120 217.
(only at dia. 25 mm and dia. 35 mm)
Switch off the machine!
Risk of injury due to accidental
machine start-up!
 Loosen the screws 1.
 Remove the cover 2.
 Lubricate the gear mechanism.
 Replace the cover 2.
 Tighten the screws 1.
Only use grease with a dripping
point of approx. 150 °C!
We recommend PFAFF sodium
soap great with a dripping point
of approx. 150 °C.
Order no. 280-1-120 243.
89