Polar Electro Polar F55 User Manual page 16

Note:
• If USER SETTINGS MISSING appears, some of the user settings
are missing. Press OK to complete all your settings. For further
information, see the section User Settings.
• You can stop the test at anytime by pressing the Back button.
Fitness Test Failed is displayed for a few seconds. Your most
recent OwnIndex value is not replaced.
• If the wrist unit does not receive your heart rate at the beginning
or during the test, the test fails. Check that the transmitter
electrodes are wet and that the textile strap is snug enough.
18 ENGLISH
The test begins with Fitness
Test and your heart rate being
displayed. The increasing
number of arrows indicates that
the test is in progress.
Stay relaxed. Keep your hands
beside your body and limit body
movements and communication
with other people.
When the test is over, the following information is displayed.
4. Press OK. UPDATE USER SET? is displayed.
. Press the / buttons to select YES or NO. Press OK.
Select No only if you know your laboratory-measured
VO value and it differs more than one Fitness class
2max
from the OwnIndex result. In this case, your OwnIndex
value is saved only to the Fitness Test Trend.
If you select Yes, your OwnIndex value is saved to your
user settings and Fitness Test Trend.
6. Continue by viewing Fitness Test Trend or press and hold
the Back button to return to the Time of Day display.
Your current OwnIndex
(VO , ml/kg/min)
2max
Your fitness classification
(for further information, see the
section Fitness Classes)
Test date