Creating Or Modifying Buildings In A Site - 3Com WX1200 Reference Manual

76 C 5: P
HAPTER LANNING THE
Creating or
Modifying
Buildings in a Site
3C M S
OM OBILITY YSTEM
To create or modify a building in a site:
1 Select the RF Planning tool bar option.
2 In the Organizer panel, click the site name.
3 Do one of the following:
If you are creating a new building, click on the site name in the
Organizer panel and select Create Building in the Task List panel.
A series of dialog boxes prompts you for information about the
new building.
If you are modifying an existing building, select the building name
in the Content panel for the site, then click Properties. A dialog
box allows you to edit the building's properties.
In the Organizer panel, click on the plus sign next to the site name
to expand it, then click on the name of the building you want to
modify. Information about the building appears in the Content
panel. You can edit the building information in the Content panel.
The following figure illustrates the information displayed in the Content
panel for a building. Note that this information is the same as the
information that appears when you click the Properties button for the
building.