3Com WX1200 Reference Manual page 270

270 C 7: C
HAPTER ONFIGURING
W P
IRELESS ARAMETERS
At the end of each power-backoff interval, radios that temporarily
increased their power reduce it by 1 dBm. The power backoff
continues in 1 dBm increments after each interval until the power
returns to expected setting.
You can specify from 0 to 65535 seconds. The default is 10 seconds.
Service Profile Selection Tab
The Profile Selection tab lists the service profiles to which the radio profile
is mapped. The radios managed by the radio profile provide wireless
service for the service profiles' SSIDs.
To map the radio profile to a service profile, select the service profile in
the Available Service Profiles list. Click Add to move the profile name to
the Current Service Profiles list.
To remove the mapping between the radio profile and a service profile,
select the service profile in the Current Service Profiles list. Click Remove
to move the profile name to the Available Service Profiles list.
Radio Selection Tab
The Radio Selection Tab lists the radios managed by the radio profile. A
radio can be managed by only one radio profile.
To add a radio to the radio profile, select the radio in the Available
Members list. Click Add to move the radio to the Current Members list.
To remove a radio from the radio profile, select the radio in the Current
Members list. Click Reset to Default to return the radio to the default
radio profile.
If the Available Members list is empty, no MAPs have been configured for
the switch yet. To configure MAPs, see "Configuring a Directly Connected
MAP" on page 277 and "Creating a Distributed MAP" on page 275. After
you configure the MAPs, return to this wizard page to apply the radio
profile to radios.