3Com WX1200 Reference Manual page 171

notify-only—The switch can use the string to send notifications.
read-write-notify—An SNMP management application using the
string can get and set object values on the switch. The switch can
use the string to send notifications.
i Click Next.
6 Configure VLANs.
VLANs that already exist, such as the default VLAN, are listed. You can
modify existing VLANs and create new ones.
To create a VLAN:
a Click Create. The Create VLAN wizard appears.
b See "Viewing and Configuring VLANs" on page 208.
c When you are finished configuring VLANs, click Next and go to
step 7.
7 Configure RADIUS servers and server groups.
RADIUS servers that are already configured are listed. You can modify
existing servers and groups and create new ones.
To create a RADIUS server and place it in a group:
a Click Create. The Create RADIUS Server wizard appears.
b See "Viewing and Configuring RADIUS Settings" on page 300.
c When you are finished configuring RADIUS settings, click Next and go
to step 8.
8 Configure wireless services.
Wireless services that are already configured are listed. You can modify
existing services and create new ones.
To create a wireless service:
a Click Create and select the type of service you want to create:
802.1X Service Profile—Provides wireless access to 802.1X clients.
Voice Service Profile—Provides wireless access to Voice over IP
(VoIP) devices.
Web-Portal Service Profile—Provides wireless access to clients who
log in using a web page.
Open Access Service Profile—Provides wireless access to clients
without requiring them to log in.
Setting Up a Switch 171