Changing Monitoring Settings - 3Com WX1200 Reference Manual

Changing
Monitoring
Settings
By default, status monitoring and monitoring of WX notifications is
enabled. Status monitoring supplies data for the Explore and Status
Summary windows of the Monitor tab. SNMP notifications (traps)
generated by WX switches supply data for the Client Monitor, RF Monitor,
and RF Trends windows. Table 63 lists the source of the data for each
window in the Monitor tab and for the Performance Statistics window.
Table 63 Sources of Monitor Data
3WXM Client Display Data Source
Event tab
Monitor tab — Explore
window
Monitor tab — Status
Summary window
Monitor tab — Client
Monitor window
Monitor tab—
RF Monitor window
Monitor tab —
RF Trends window
Rogue Detection tab
Performance
Monitoring window
The monitoring options require SNMP traps to be enabled on the
monitored WX switches and also require 3WXM Services to be
configured as a notification target (trap receiver) for each of the switches.
The data for some reports also requires monitoring options to be
enabled. For information, see the descriptions for each report in
"Generating Reports" on page 385.

Changing Monitoring Settings

3WXM client, for 3WXM client messages
3WXM Services, for monitoring service
messages
Enable log monitoring option, for WX switch
messages
Status monitoring of WX switches 3WXM
Services
Status monitoring of WX switches by 3WXM
Services
Enable client session collection option
Status monitoring of WX switches by 3WXM
Services
(Does not apply to the Activity tab at the
bottom of the window)
Collect radio activity traps
Enable RF trending option
Enable Rogue Detection option, which
activates polling and uses SNMP traps received
by 3WXM Services from monitored WX
switches
Statistics data received by 3WXM client directly
from managed WX switches. 3WXM Services
does not provide this data.
503
Default
Enabled
Enabled
Enabled
Enabled
Enabled
Disabled
Enabled
Disabled
Enabled
Enabled
Enabled