3Com WX1200 Reference Manual page 432

432 C 16: M
HAPTER ONITORING THE
N
ETWORK
Table 50 Session Properties Columns
Column
Username
MAC Address
Start Time
SSID
EAP Type
IP Address
VLAN Name
Authentication Server
Access Type
Description
Username the client used to log on to the network.
MAC address of the client.
Date and time when the session began. The date and time
are based on the system date and time of the WX switch
with which the client is associated.
SSID with which the client is associated.
Extensible Authentication Protocol (EAP) used for
authentication:
PEAP — Protected Extensible Authentication Protocol
MD5 — Message-digest algorithm 5
TLS — Transport Layer Security protocol
Pass-Through — The switch established an EAP
session directly between the client and the RADIUS
server. All authentication information and certificate
exchanges between the client and RADIUS server
passed through the switch.
None — EAP was not used to authenticate this client.
None is the EAP type when MAC authentication,
last-resort authentication, or WebAAA is used to
authenticate the client.
IP address of the client.
VLAN onto which the WX switch placed the user. This is
the VLAN for which the user was authorized by the
RADIUS server or the WX switch.
System IP address of the WX switch that was attempting
to authenticate the client.
Note — The system IP address is listed even if the switch
was using a RADIUS server to authenticate the client.
Authentication type that granted access:
DOT1X
MAC
LAST-RESORT
WEB