3Com WX1200 Reference Manual page 490

490 C A: C
HAPTER HANGING
3WXM P
REFERENCES
3 To change the saturation value, select the S option and do one of the
following:
In the S box, specify a value between 0 and 100 percent.
Use the slider to specify the saturation value.
4 To change the brightness value, select the B option and do one of the
following:
In the B box, specify a value between 0 and 100 percent.
Use the slider to specify the brightness value.
5 Click OK to accept the color. The RF Planning Options tab in the
Preferences dialog box is active.
6 Do one of the following:
Change another color.
Click another Preferences tab.
Click Close to close the Preferences dialog box.
Defining a Color by Changing RGB Properties
You can define a color by changing red, blue, and green (RGB) color
properties.
1 To specify a color by changing RGB, click RGB in the Choose Color dialog
box.
2 Use the Red, Green, and Blue sliders to define a color.
You can see a preview of the color in the Preview box.
3 Click OK to accept the color. The RF Planning Options tab in the
Preferences dialog box is active.
4 Do one of the following:
Change another color.
Click another Preferences tab.
Click Close to close the Preferences dialog box.