Adding User Accounts - IBM DS8000 User Manual

Adding user accounts

You must have Administrator level privileges to add a new user account. If you do
not have Administrator level privileges, Add does not display in the Select Action
drop-down box of the User administration - Main page. You can also add a user
account with the mkuser DS Command-Line Interface command. See DS CLI
documentation for more information.
1. Under Monitor system, select User administration. In User administration —
2. Specify the user name. You can enter up to 16 characters.
3. Specify the user account password. This entry is displayed as asterisks.
Table 3. User Group capabilities (continued)
Capability Administrator
Manage Copy
Services
(FlashCopy, remote
mirror and copy,
Global Mirror)
Set Copy Services
timeout values
Update user
account password
Query FRUs and
enclosures
Query
configuration
Query Copy
Services
FRU management
Problem
management
Validate
communication
paths
Activate code load
Create a new PE
package
Manage storage
unit IP addresses
Main page, select Add in the Select Action drop-down box. The Add user page
is displayed.
Passwords must meet the following criteria:
v Be six to 16 characters long.
v Must contain five or more letters, and it must begin and end with a letter.
v Must contain one or more numbers.
v Cannot contain the user's user ID.
v Is case-sensitive.
Physical Logical
Operator Operator
X X
X X
X X X
X X X
X X X
X X X
X
X
X
X
X
X
Copy
Services No
Operator Monitor Access
X
X
X X
X X
X X
X X
Chapter 6. Administering
X
93