IBM DS8000 User Manual page 100

72
DS8000 User's Guide
known as /dev/cdrom at mount point /mnt/cdrom. When the time comes
for you to mount the CD in this drive, perform the following steps:
a. Insert the CD in the CD-ROM drive.
b. Type the following command at the command prompt: # mount -o ro
/dev/cdrom /mnt/cdrom
4. Choose the destination paths for the DS8000 Storage Manager components
and be sure that you have enough space available on the chosen destination.
The upgrade program (installer) provides a default installation location
(/opt/IBM/DS8000StorageManager) for the component. You can override the
default installation location by using the installer browse function. When you
click Next, the installer analyzes the available space for the location that you
provide. If there is not enough space, you cannot proceed to the next panel in
the upgrade process.
5. Change the current directory to the mount point for the CD-ROM drive. For
example, if the CD was mounted at the /mnt/cdrom mount point, type the
following command: # cd /mnt/cdrom.
6. Run the wizard launcher, launchpad_linux, by typing the following command:
# ./launchpad_linux. The upgrade in graphical mode begins with a
LaunchPad facility to launch the upgrade program wizard.
The LaunchPad facility provides links for you to view various text files, such
as:
DS8000 Storage Manager overview
Provides information about the IBM System Storage DS Storage Manager
software.
Readme file (recommended selection)
Provides last minute product information that was not provided in these
upgrade instructions.
User's guide
Provides the instructions, in HTML format, associated with installing and
upgrading the DS8000 Storage Manager.
DS8000 Storage Manager Web site
Provides information from the product Web site.
Installation wizard
Starts the IBM System Storage DS Storage Manager upgrade program.
Post installation tasks
Provides information about configuring the IBM System Storage DS
Storage Manager.
Exit
Exits the IBM System Storage DS Storage Manager LaunchPad program.
7. Click the README selection on the LaunchPad window to ensure that you
have the latest installation and upgrade information. The README file can
provide additional information that supersedes information in this guide.
Note: You can also access the README.txt file located in the doc subdirectory
on the IBM System Storage DS8000 Storage Manager CD.
8. Click the Installation wizard selection on the LaunchPad to start the upgrade.
Note: The LaunchPad window remains open (behind the wizard) during the
upgrade. You can access product information after the upgrade has