Configuration Options - Planet Networking & Communication WGS3-2620 User Manual

5.2.2 Configuration Options

Configurable parameters have a dialog box or a drop-down list. Once a configuration change has been
made on a page, be sure to click on the "Apply" button at the bottom of the page to confirm the new
setting. The following table summarizes the Web page configuration buttons.
Web Page Configuration Buttons
Button
Apply
Cancel
Refresh
NOTE 1. To ensure proper screen refresh, be sure that Internet Explorer 5.0 is configured as follows:
Under the menu "Tools / Internet Options / General / Temporary Internet Files / Settings," the
setting for item "Check for newer versions of stored pages" should be "Every visit to the page."
NOTE 2. When using Internet Explorer 5.0, you may have to manually refresh the screen after making
configuration changes by pressing the browser's refresh button.
WGS3 Layer 3 Switch User's Manual
Action
Sets specified values in the SNMP agent.
Cancels specified values prior to pressing the "Apply" button.
Immediately updates values from the SNMP agent
- 136 -