Downloading System Software - Planet Networking & Communication WGS3-2620 User Manual

4.4.5 Downloading System Software

Use the TFTP Download menu to load software updates to permanent flash ROM in the switch. The
download file should be a 3 binary file or image file; otherwise the agent will not accept it. The success of
the download operation depends on the accessibility of the TFTP server and the quality of the network
connection. After downloading the new software, the agent will automatically restart itself. Parameters
shown on this screen are indicated in the following figure and table.
Parameter
Download Server IP
Download Filename
Download Option
NOTE: You can also download firmware using the Web agent or by a direct console connection after a
restart.
WGS3 Layer 3 Switch User's Manual
Description
IP address of a TFTP server.
The binary file to download.
Specify the file to be Runtime code or POST code.
- 34 -