Setting The Arp Timeout; Setting The Rip Advertisement Policy - Planet Networking & Communication WGS3-2620 User Manual

5.7.5.1 Subnet Configuration).

5.7.5.2.1 Setting the ARP Timeout

You can use the following configuration screen to modify the aging time for dynamically learned entries in
the ARP cache.
Parameter Default
ARP Timeout 20 minutes

5.7.5.2.2 Setting the RIP Advertisement Policy

You can use the following configuration screen to set the timing interval and policies RIP uses to
advertise route information.
Parameter Default
RIP Update Time 30 seconds
WGS3 Layer 3 Switch User's Manual
Description
The time that dynamically learned entries are retained in the ARP cache.
Range: 0-999 minutes, where 0 disables aging
Description
The interval at which RIP advertises known route information.
Range: 0-999 seconds, where 0 disables route advertisements
- 186 -