Configuring Ip Trap Managers - Planet Networking & Communication WGS3-2620 User Manual

5.6.2.2 Configuring IP Trap Managers

The following figure and table describe how to specify management stations that will receive
authentication failure messages or other trap messages from the switch. Up to 5 trap managers may be
entered.
Parameter Description
IP Address IP address of the trap manager.
Community Name A community authorized to receive trap messages.
Status Displays the administrative status of entry. An entry can only be to enabled or
disabled via the console interface.
WGS3 Layer 3 Switch User's Manual
- 150 -