Table of Contents
Advertisement
5. Repeat Step 1 to check if the IP address has changed.
If the IP is successfully configured, the Managed Switch will apply the new IP
address setting immediately. You can access the Web interface of Managed Switch
through the new IP address.
If you are not familiar with console command or the related param-
eter, enter "?" anytime in console to get the help description.
Note
3.3 Storing Current Switch Configuration
In switches, the running configuration file is stored in the RAM. In the current
version, the running configuration sequence can be saved from the RAM to FLASH
by saving command or copying running-config startup-config command, so
that the running configuration sequence becomes the startup configuration file,
which is called configuration save.
1. On "GS-4210-24T4S #" prompt, enter "copy running-config startup-config"
as shown in Figure 3-6.
Figure 3-6: Saving the Configuration Screen
9
Advertisement
Table of Contents
