Ospf Table; Display Interface Table; Displaying The Link State Table - Planet Networking & Communication WGS3-2620 User Manual

5.8.6.5 OSPF Table

You can use this menu to display the OSPF router linkages for the autonomous system based on the
Link State Table, Neighbor Table, and Virtual Neighbor Table.
Parameter
Interface Table
Link State Table
Neighbor Table
Virtual Neighbor

5.8.6.5.1 Display Interface Table

This function allow you to display each IP interface's OSPF status.
Parameter
IP Address
Rtr ID
Designated Rtr
Backup Rtr
Status
Events

5.8.6.5.2 Displaying the Link State Table

The link state table displays all advertisements in the link state database. This database contains linkage
information for all the areas to which this router is attached. Note that all the routers within an area
exchange information to ensure that they maintain an identical link state database. This database can
therefore be used to troubleshoot network configuration problems.
WGS3 Layer 3 Switch User's Manual
Description
Displays interface OSPF status
Displays a summary link state advertisements.
Displays current neighbor routers.
Table Displays current virtual neighbors.
Description
IP address of the interface
The OSPF identifier for the neighboring router.
The designated router IP address for the broadcast network on the interface
The backup designated router IP address for the broadcast network on the
interface
The interface status.
The number of events encountered that cause a neighbor state change since
boot up.
- 222 -