Device Control Menu - Planet Networking & Communication WGS3-2620 User Manual

4.5 Device Control Menu

The Device Control menu is used to control a broad range of functions, including port mode, port
mirroring, port trunking, Spanning Tree, Virtual LANs, IP subnets, multicast filtering, and routing protocols.
Each of the setup screens provided by these configuration menus is described in the following sections.
Menu
System Mode
Layer 2 Menu
Bridge Menu
VLAN Menu
IGMP Snooping
*1
Configuration
*2
IP Menu
Security
Jumbo Packet Menu
1: Only displayed for Layer 2 mode of WGS3-2620.
2: Only displayed for Multilayer mode of WGS3-2620 and WGS3-404.
3: Only displayed for WGS3-404
WGS3 Layer 3 Switch User's Manual
Description
Sets the switch to operate as a Layer 2 switch or as a multilayer routing switch.
Configures port communication mode, mirror ports, and port trunking.
Configures the Spanning Tree Protocol for the bridge or for specific ports,
GMRP and GVRP for automatic registration of multicast and VLAN groups,
traffic class priority threshold, and address aging time.
Configures VLAN settings for specific ports, and defines the port membership
for VLAN groups.
Configures IGMP multicast filtering.
Configures the subnets for each VLAN group, global configuration for unicast
and multicast routing protocols, IGMP snooping
Restrict access through MAC address or IP address
Allow the WGS3-404 to send up to 9k jumbo packet
- 37 -
*2