Monitoring The Switch - Planet Networking & Communication WGS3-2620 User Manual

4.6 Monitoring the Switch

The Network Monitor Menu provides access to port statistics, address tables, STA information, VLANs
registration and forwarding information, multicast groups. Each of the screens provided by these menus
is described in the following sections.
Menu Description
Port Statistics Displays statistics on port traffic, including information from the Interfaces Group,
Ethernet-like MIB, and RMON MIB.
Layer 2 Address Contains the unicast address table.
Table
Bridge Menu Displays Spanning Tree settings for the overall switch and for specific ports.
VLAN Menu Displays ports dynamically learned through GMRP or GVRP, and ports that are
currently forwarding VLAN traffic.
IP Multicast Displays all the multicast groups active on this switch, including the multicast IP
*1
Registration Table address and the corresponding VLANs.
*2
IP Menu Displays all the IP subnets used on this switch, as well as the corresponding
VLANs and ports. Also contains the ARP table, routing table and multicast menu.
*1: This menu is only displayed if WGS3-2620 is set to Layer 2 mode.
*2: This menu is only displayed on WGS3-404 or WGS3-2620 when it is set to multilayer mode.
WGS3 Layer 3 Switch User's Manual
- 93 -