Lldp Management Address Settings - D-Link DES-1228/ME User Manual

Configuration/Status
Link Aggregation
Maximum Frame
Size
Click Apply to implement changes made.

LLDP Management Address Settings

The following window is used to set up LLDP management address settings on the Switch. To view this window click L2
Features > LLDP > LLDP Management Address Settings.
The following parameters can be set or displayed:
DES-1228/ME Layer 2 Fast Ethernet Managed Switch
Disabled.
Use the drop-down menu to toggle Link Aggregation between Enabled and Disabled.
Use the drop-down menu to toggle Maximum Frame Size between Enabled and Disabled.
Figure 7- 41. LLDP Management Address Settings window
109