Pppoe - Planet VRT-401G User Manual

Parameters
IP
Subnet Mask
DNS
Gateway IP
TTL
Click <OK> when you have finished the configuration above. Congratulations! You have
completed the configuration for the Fixed-IP x DSL connection. You can start using the router
now, if you wish to use some of the advance features supported by this router see chapter 2, 3, 4.

1.3 PPPoE

Select PPPoE if your ISP requires the PPPoE protocol to connect you to the Internet. Your ISP
should provide all the information required in this section.
Description
This is the IP address that your ISP has given you.
Enter the Subnet Mask provided by your ISP
(e.g. 255.255.255.0)
This is the ISP's DNS server IP address
This is the ISP's IP address gateway
This is optional. Some ISP will check the TTL response to build
up the connection. When you select Enabled, VRT-401G will
respond the TTL time plus 1.
19