Planet VRT-401G User Manual page 49

Add a QoS rule into the table
Remove QoS rules from the table
Edit a QoS rule
Adjust QoS rule priority
Edit QoS Rule:
You can assign packet classification criteria by its local IP range, remote IP range, traffic type,
protocol, local port range and remote port range parameters. The parameters that you leave as
blank will be ignored. The priority of this rule will be applied to packets that match classification
criteria of this rule. You can limit bandwidth consumed by packets that match this rule or
guarantee bandwidth required by packets that match this rule.
Parameters Description
Rule Name The name of this rule.
Click "Add" then you will enter a form of the QoS
rule. Click "Apply" after filling out the form and
the rule will be added into the table.
If you want to remove some QoS rules from the
table, select the QoS rules you want to remove
in the table and then click "Delete Selected". If
you want remove all QoS rules from the table,
just click "Delete All" button. Click "Reset" will
clear your current selections.
Select the rule you want to edit and click "Edit",
then you will enter the detail form of the QoS
rule. Click "Apply" after editing the form and the
rule will be saved.
You can select the rule and click "Move Up" to
make its priority higher. You also can select the
rule and click "Move Down" to make its priority
lower.
49