Planet VRT-401G User Manual page 61

users to define the traffic type permitted in your LAN. You can control which PC client can have
access to these services.
Parameters
Deny
Allow
Filter client PC by MAC address
Add PC
Remove PC
Filter client PCs by IP
Add PC
Remove PC
Description
If select "Deny" then all PCs will be allowed to access
Internet accept for the PCs in the list below.
If select "Allow" then all PCs will be denied to access
Internet accept for the PCs in the list below.
Check "Enable MAC Filtering" to enable MAC Filtering.
Fill in "Client PC MAC Address" and "Comment" of the
PC that is allowed to access the Internet, and then click
"Add". If you find any typo before adding it and want to
retype again, just click "Reset" and the fields will be
cleared.
If you want to remove some PC from the "MAC Filtering
Table", select the PC you want to remove in the table
and then click "Delete Selected". If you want remove all
PCs from the table, just click "Delete All" button. If you
want to clear the selection and re-select again, just click
"Reset".
Fill "IP Filtering Table" to filter PC clients by IP.
You can click Add PC to add an access control rule for
users by IP addresses.
If you want to remove some PC from the "IP Filtering
Table", select the PC you want to remove in the table
61