Step 2) Broadband Type - Planet VRT-401G User Manual

Step 2) Broadband Type

In this section you have to select one of four types of connections that you will be using to
connect your VRT-401G's WAN port to your ISP (see screen below).
Note: Different ISP's require different methods of connecting to the Internet, please check with
your ISP as to the type of connection it requires.
Menu
1.1 Cable Modem
1.2 Fixed-IP xDSL
1.3 PPPoE
1.4 PPTP
1.5 L2TP
1.6 Telstra Big Pond
Click on one of the WAN type and then proceed to the manual's relevant sub-section (1.1, 1.2,
1.3, 1.4, 1.5 or 1.6). Click on Back to return to the previous screen.
Description
Your ISP will automatically give you an IP address
Your ISP has given you an IP address already
Your ISP requires you to use a Point-to-Point Protocol over
Ethernet (PPPoE) connection.
Your ISP requires you to use a Point-to-Point Tunneling Protocol
(PPTP) connection.
Your ISP requires you to use a Layer Two Tunneling Protocol
(L2TP) connection.
This Protocol only used for Australia's ISP connection.
17