Pppoe Xdsl - Planet WNRT-626G User Manual

Parameters
IP address assigned by your
Service Provider
Subnet Mask
DNS Address
Service Provider Gateway
Address
Please consult your local ISP about the information above. When the configuration finished please
click "OK" to next step or click "Back" to previous step. After press "OK", you will see a web screen to
prompt you the configurations save successfully. Please refer to section 4.2.7 for the information of this
screen.
4.2.4

PPPoE xDSL

Select PPPoE if your ISP requires the PPPoE protocol for Internet connectivity. Your ISP should
provide all the information like user name, password required in this section.
Parameters Description
User Name Enter the User Name provided by your ISP for the PPPoE connection.
Password Enter the Password provided by your ISP for the PPPoE connection.
Service Name This is an optional parameter. Leave it blank unless your ISP requires it.
This is an optional parameter. You can specify the maximum size of transmission
MTU packet to the Internet. The range of the MTU will be from 512 to 1492. You can also
consult you ISP for the optimal MTU as well. Default: 1392.
Description
The IP address that you're ISP should provide you.
Enter the Subnet Mask provided by your ISP (e.g. 255.255.255.0).
The IP address of ISP's DNS (Domain Name Service) Server.
The ISP's IP address gateway.
19