Connection Status - Pppoe - Planet WRT-413 User Manual

Broadband Modem
Internet Connection
Internet IP Address
"Connection Details"
Button
LAN
IP Address
Network Mask
DHCP Server
System
Device Name
Firmware Version
Buttons
Connection Details
System Data
Restart
Refresh Screen

Connection Status - PPPoE

If using PPPoE (PPP over Ethernet), a screen as below will be displayed when the "Connection Details" button is
clicked.
Wizard or WAN Port screen.
This shows the status of the connection from the WRT-413 to the
Broadband Modem.
Current connection status:
•
Active
•
Idle
•
Unknown
•
Failed
If there is an error, you can click the "Connection Details" button
to find out more information.
This IP Address is allocated by the ISP (Internet Service Pro-
vider). If there is no current connection, this will be blank or
0.0.0.0.
Click this button to open a sub-window and view a detailed
description of the current connection. Depending on the type of
connection, a "Connection Log" may also be available.
The IP Address of WRT-413 LAN interface.
The Network Mask (Subnet Mask) for the IP Address above.
This shows the status of the DHCP Server function - either "En-
abled" or "Disabled".
For additional information about the PCs on your LAN, and the IP
addresses allocated to them, use the PC Database option of the
Administration menu.
This displays the current name of the WRT-413.
The current version of the firmware installed in the WRT-413.
Shows the details of the current Internet connection. The sub-
screen displayed will depend on the connection method used. See
the following sections for details of each sub-screen.
Display all system information in a sub-window.
Clicking this button will restart (reboot) the WRT-413. All exist-
ing connections though the WRT-413 will be terminated, but will
usually re-connect automatically after restart.
Update the displayed data on screen.
36