Dial-Up Xdsl(Pppoe) - Planet XRT-401E User Manual

Parameter
IP address assigned by
your ISP
Subnet Mask
ISP Gateway Address

2.3 Dial-Up xDSL(PPPoE)

Select Dial-Up xDSL (PPPoE) if your ISP requires the PPPoE protocol to connect you to
the Internet. Your ISP should provide all the information required in this section.
Parameter
User Name
Password
Retype Password
Service Name
MTU
Maximum Idle Time
This is the IP address that your ISP has given you.
Enter the Subnet Mask provided by your ISP.
(e.g. 255.255.255.0)
This is the ISP's IP address gateway.
Enter the User Name provided by your ISP for the PPPoE
connection.
Enter the Password provided by your ISP for the PPPoE
connection.
Re-enter the Password for confirmation.
This is optional. Enter the Service name should your ISP
requires it, otherwise leave it blank.
This is optional. You can specify the maximum size of your
transmission packet to the Internet. Leave it as it is if you do
not wish to set a maximum packet size. (The default settings is
1492)
You can specify an idle time threshold (seconds) for the WAN
port. This means if no packets have been sent (no one using
the Internet) during this specified period, the router will
automatically disconnect the connection with your ISP. (The
default settings is 300 seconds)
17
Description
Description