Pptp Server - Planet VRT-401G User Manual

L2TP Settings
Parameters
Enable L2TP Server
Server IP Address
Client IP Pool
Authentication
VPN Users
Click <Apply> at the bottom of the screen to save the above configurations.
Note: L2TP client IP address must be public IP.

2.8.3 PPTP Server

PPTP is a protocol from Microsoft that is used to create a virtual private network (VPN) over the
Internet. It uses Microsoft's Point-to-Point Encryption (MPPE), which is based on RSA's RC4.
Description
By enable this server, we can enable the operation of a
virtual private network (VPN) over the Internet.
Specify the IP Address that the L2TP clients talked with.
Note: The Server IP Address can be different to LAN IP
or WAN IP.
Specify the IP Address for L2TP clients to use.
You can use PAP, CHAP, or MSCHAP for authentication.
You can input up to ten usernames and passwords for
the L2TP/PPTP clients here.
72