Planet VRT-401G User Manual page 22

Parameter
Obtain an IP address
automatically
MAC Address
Use the following IP address
IP Address
Subnet Mask
Gateway
User ID
Password
PPTP Gateway
Connection ID
MTU
BEZEQ-ISRAEL
Connection Type
Description
The ISP requires you to obtain an IP address by DHCP
before connecting to the PPTP server.
Your ISP may require a particular MAC address in order for you
to connect to the Internet. This MAC address is the PC's MAC
address that your ISP had originally connected your Internet
connection to. Type in this MAC address in this section or use
the "Clone MAC Address" button to replace the WAN MAC
address with the MAC address of that PC (you have to be using
that PC for the Clone MAC Address button to work). To find out
the PC's MAC address see Appendix A. (see Glossary for an
explanation on MAC address)
The ISP gives you a static IP to be used to connect to the PPTP
server.
This is the IP address that your ISP has given you to establish a
PPTP connection.
Enter the Subnet Mask provided by your ISP
(e.g. 255.255.255.0)
Enter the IP address of the ISP Gateway
Enter the User Name provided by your ISP for the PPTP
connection. Sometimes called a Connection ID
Enter the Password provided by your ISP for the PPTP
connection
If your LAN has a PPTP gateway, then enter that PPTP gateway
IP address here. If you do not have a PPTP gateway then enter
the ISP's Gateway IP address above
This is the ID given by ISP. This is optional.
This is optional. You can specify the maximum size of your
transmission packet to the Internet. Leave it as it is if you to not
wish to set a maximum packet size.
Select this item if you are using the service provided by BEZEQ
in Israel.
If you select "Continuous", the router will always connect to the
ISP. If the WAN line breaks down and links again, the router will
auto-reconnect to the ISP.
If you select "Connect On Demand", the router will auto-connect
to the ISP when someone want to use the Internet and keep
connected until the WAN idle timeout. The router will close the
WAN connection if the time period that no one is using the
Internet exceeds the "Idle Time".
If you select "Manual", the router will connect to ISP only when
you click "Connect" manually from the Web user interface. The
22