Parameter
2.1.2.1 PPPoE Your ISP requires you to use a Point-to-Point Protocol over Ethernet
(PPPoE) connection.
2.1.2.2 PPTP
Your ISP requires you to use a Point-to-Point Tunneling Protocol (PPTP)
connection.
Layer 2 Tunneling Protocol is a common connection method used in xDSL
2.1.2.3 L2TP
connections.
2.1.2.4
Your ISP will automatically give you an IP address.
Dynamic
2.1.2.1 PPPoE
Select Dial-Up xDSL (PPPoE) if you're ISP requires the PPPoE protocol to connect you to
the Internet. Your ISP should provide all the information required in this section.
Parameter
Description
Description
18