Deleting A Logical Ip Interface - Alcatel-Lucent 7210 SAS Configuration Manual

Deleting a Logical IP Interface

The no form of the
must be shut down and/or deleted before an interface can be deleted.
1. Before loopback IP interface can be deleted, it must first be administratively disabled with
2. After the interface has been shut down, it can then be deleted with the no interface
CLI Syntax: config>router
Example
7210 SAS D, E OS Router Configuration Guide
interface
the command.
shutdown
command.
no interface
:
config>router# interface test-interface
config>router>if# shutdown
config>router>if# exit
config>router# no interface test-interface
config>router#
command typically removes the entry, but all entity associations
ip-int-name
IP Router Configuration
Page 25