Figure 3-17. Ide Configuration Screen - Protech Systems PA-6322 User Manual

IDE Configuration
Menu Path
Advanced > IDE Configuration
BIOS Setting
Serial-ATA
Controller(s)
SATA Test Mode
SATA Speed
Support
SATA ODD Port
PA-6322 SERIES USER MANUAL

Figure 3-17. IDE Configuration Screen

Options
- Disabled
- Enabled
- Disabled
- Enabled
- GEN1
- GEN2
- Port0 ODD
- Port1 ODD
- No ODD
Description/Purpose
Enable or disable SATA Device.
Enable or disable SATA Test Mode.
•
Gen1 mode sets the device to 1.5 Gbit/s speed.
•
Gen2 mode sets the device to 3 Gbit/s speed
(in case it is compatible).
SATA ODD is Port0 or Port1
Chapter 3 Software
Page: 3-120